3. Hydraulic lift cap, easy and convenient replacement and maintenance

4. Over vibration alarm system

5. Special dustproof seal system, outside powder is prevented from entering oil mouth

6. Unique feeding method (change between central feeding and central feeding with cascade feeding make “rock on rock” and ‘rock on iron” possible, both crushing and shaping are achieved.

7. Particular material throw head design and reasonable material selection prolong the service time.

The Zenith VSI Crusher Working Principle:

Zenith B series Vertical Shaft Impact Crusher works as below: the materials enter the crusher through feeder hopper, which is divided into two parts, one part entering into the rotating through the middle of distributor impeller at high speed, then is accelerated, and shot through the tunnels around the impeller by the speed of 60-75 meter/second. First the materials will impact with some materials fallen around distributor, hit on the crushing chamber together, then will be rebounded and impact on the top of the crushing chamber, changes its direction and goes down, forms continual material layers with the materials shot from the impeller. Therefore some materials will be impacted, crushed, milled twice or more times in the crushing chamber, then crushed materials will be discharged through the bottom. This can form a closed circulation system; in general, the sand forming percentage increases 20-30% and the product shape is good. Airflow self-circulation in the crushing chamber can eliminate the dust pollution well. It is the first choice in manufacturing sand and its shape correction industries.